ETTER ART PREMIUM SILICONE SOFT ROSÉ 22

Our Etter Art PREMIUM SILICONE SOFT ROSÉ 22 is a silicone rubber consisting of two components, base and catalyst. It is easy to process, has a low viscosity and very good flowability.

Etter Art PREMIUM SILICONE SOFT ROSÉ 22 has a high level of detail accuracy in reproduction. It hardens without reaction heat to a resistant, elastomeric plastic. It is also extremely tear-resistant and flexible to use. After the hardening process, it can be easily removed from the negative model thanks to its excellent non-stick effect.

Possible applications Etter Art PREMIUM SILICONE SOFT ROSÉ 22

Etter Art PREMIUM SILICONE SOFT ROSÉ 22 is suitable for moulds that need to be detailed, sophisticated, hard-wearing and elastic. It is particularly suitable for moulds of all kinds, for example coasters, trays, candle holders, baking tins and much more. You can also use it for casting resin, soap moulding, plaster or concrete. Etter Art PREMIUM SILICONE SOFT ROSÉ 22 is also suitable for manual or machine processing.

Special features of Etter Art PREMIUM SILICONE SOFT ROSÉ 22

• Addition curing
• Hardness: Shore A 22 (after 24 hours)
• Heat resistant up to 180 °C
• Frost-resistant to at least -45 °C
• Can be stored unopened for up to two years
• Processing at room temperature approx. 15 °C
• Minimal shrinkage of less than 0.1 %
• Viscosity of 3,260 mPa
• Tear strength up to 24.0 KN/m
• Resistant up to 5.0 N/mm²
• Solvent-free
• Food grade quality
• Non-toxic
• Non-flammable
• Non-corrosive
• Not harmful in contact with skin

Application Etter Art PREMIUM SILICONE SOFT ROSÉ 22

Step 1: Base and catalyst of PREMIUM SILICONE SOFT ROSÉ 22 are mixed 1:1 by weight. Pour the components into a suitable mixing cup.

Step 2: Stir the measured quantity in the mixing cup. Stir slowly and carefully for 2-3 minutes, including the bottom and sides of the mixing cup, until a streak-free and even rosé colour is achieved.

Step 3: Your mixture is ready and you now have 7-8 minutes to work the silicone. It will then become too thick and start to harden.

Step 4: You have prepared your casting mould beforehand, i.e. it has been dusted, degreased and is lying flat on your work surface. Pour the silicone into your mould from a great height in a narrow stream. The high height ensures that the result is as bubble-free as possible.

Step 5: Protect your mould from dust or other foreign objects by working in as dust-free an environment as possible. The curing time is one hour at a room temperature of 23 °C. The silicone can be removed from the mould after 3 hours.